Skip to main content
Log in
95687-470HLF — Amphenol product photo
Amphenol

95687-470HLF BERGSTIK II Header, 70 Pos, 2.54mm, 5A

MPN95687-470HLF
Active

Amphenol FCI BERGSTIK® II, 95687-470HLF, 70-position dual-row unshrouded male header, 0.100" (2.54 mm) pitch, through-hole solder, tin plating, 5 A at 110 V, UL94 V-0.

$6.2215Ref. price · indicative, final on quote
95687-470HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

95687-470HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions70
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.360\" (9.14mm)
Overall contact length0.820\" (20.83mm)
Contact finish - matingTin
Contact length - mating0.360\" (9.14mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The through-hole solder tails are 0.360" (9.14 mm) long, which suits standard PCB thicknesses around 1.6 mm with enough protrusion for a reliable solder fillet.

Board-to-board style and unshrouded design

Listed as a board-to-board style connector, this header is designed to mate with a dual-row 0.100" pitch receptacle — typically a BERGSTIK II socket or a standard IDC socket with the same 70-position count. Because it is unshrouded, there is no polarization key; the mating receptacle's housing provides alignment. With an overall contact length of 0.820" (20.83 mm), the total stack height from board to mated interface is determined by the receptacle's own insulation height plus the 0.360" (9.14 mm) mating pin length.

Frequently asked questions

What is the current rating of 95687-470HLF?

The 95687-470HLF is rated 5 A per circuit at 110 V. This is a general-purpose signal-level rating suitable for board-to-board interconnects where each pin carries logic-level or low-power loads.

What is the mating connector for BERGSTIK II headers?

BERGSTIK II unshrouded headers mate with any dual-row 0.100" (2.54 mm) pitch receptacle that has 70 positions — typically a BERGSTIK II socket or a standard IDC socket with the same circuit count. The unshrouded design means the receptacle housing provides the alignment.

What is the insulation height of 95687-470HLF?

The insulation height is 0.100" (2.54 mm). This is the distance from the top of the PCB to the bottom of the header body, which determines how much of the mating pin is exposed above the insulation for the receptacle to engage.