BergStik II 72-Position Unshrouded Header
The FCI 95687-472HLF is a 72-position unshrouded male pin header from the BergStik II series, designed for board-to-board stacking on a standard 0.100" (2.54mm) pitch grid. The dual-row layout with 0.100" row spacing gives you 72 circuits in a compact footprint — matching a 72-conductor ribbon cable or a dense backplane interconnect. Tin plating on both the mating surface and the solder tails keeps the per-unit cost down while the 100.0µin (2.54µm) contact finish thickness provides a robust wear layer for moderate mating cycles in production or field service.
Rated 5A per contact at the stated voltage of 110V — the current limit is typical for a signal-level header on a 0.100" pitch; the limiting factor is temperature rise through the housing, not the contact itself. The through-hole solder termination with a 0.360" (9.14mm) post length gives a solid mechanical anchor on the board, and the overall contact length of 0.820" (20.83mm) sets the mated stack height — confirm your mating receptacle's insulation height to get the right board-to-board gap.