Amphenol ICC (FCI) Minitek® 2.00mm header, 24 positions, dual-row, shrouded – 4 Wall, through hole, gold GXT™ mating finish, 2 A at 200 V AC/DC, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | Minitek® 2.00mm |
| Gender | Male Pin |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 200V (AC/DC) |
| Current rating | 2A (AC/DC) |
| Contact material | Copper Alloy |
| Insulation color | Cream |
| Insulation height | 0.232\" (5.90mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Tube |
| Features | Keying Slot |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 24 |
| Row spacing - mating | 0.079\" (2.00mm) |
| Contact finish - post | Tin |
| Contact length - post | 0.098\" (2.50mm) |
| Contact finish - mating | Gold, GXT™ |
| Contact length - mating | 0.157\" (4.00mm) |
| Contact finish thickness - post | 78.7µin (2.00µm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The 98414-G06-24ULF: The through-hole solder tails extend 0.098 inch below the board surface; the 0.232 inch insulation height above the board leaves room for the mating receptacle's latch engagement.
Mates with Minitek 2.00mm receptacle housings that accept 20-28 AWG crimp terminals. The latch holder engages with the receptacle's locking ramp – confirm the mating half includes the corresponding latch feature. Termination is solder-only – no press-fit option.
Yes – it is a shrouded – 4 Wall header, meaning the male pins are fully enclosed on all four sides by the housing wall. The latch holder adds a positive locking mechanism for vibration-resistant mating.
The mating pitch is 0.079 inch (2.00 mm) between contacts, with the same 0.079 inch row spacing.