Skip to main content
Log in
98414-S06-40ULF
Amphenol

Amphenol ICC (FCI) 98414-S06-40ULF Minitek 2.00mm Header

MPN98414-S06-40ULF
Active

Amphenol ICC (FCI) Minitek® 2.00mm header, order code 98414-S06-40ULF, 40 positions, dual row, 0.079" (2.00mm) pitch, 2 A (AC/DC), 200 V (AC/DC), gold GXT™ mating contacts, through-hole, solder termination.

$2.0771Ref. price · indicative, final on quote
98414-S06-40ULF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

98414-S06-40ULF Technical Specifications
ParameterValue
SeriesMinitek® 2.00mm
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLatch Holder
Voltage rating200V (AC/DC)
Current rating2A (AC/DC)
Contact materialCopper Alloy
Insulation colorCream
Insulation height0.232\" (5.90mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageTube
FeaturesKeying Slot
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions40
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.098\" (2.50mm)
Contact finish - matingGold, GXT™
Contact length - mating0.157\" (4.00mm)
Contact finish thickness - post78.7µin (2.00µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

Minitek 2.00mm 40-position header

The 98414-S06-40ULF is the 40-circuit, dual-row member of Amphenol ICC (FCI)'s Minitek 2.00mm shrouded header line. Rated 2 A (AC/DC) at 200 V (AC/DC) with gold GXT™ mating contacts, the header mates with Minitek 2.00mm receptacle housings using the latch-holder fastening system.

Shrouded 4-wall design with keying slot

The 4-wall shrouding and keying slot protect the 0.157" (4.00mm) mating pins during handling and blind-mating, while the latch holder provides positive retention against vibration. Insulation height is 0.232" (5.90mm); the post length of 0.098" (2.50mm) suits standard through-hole board thicknesses.

Frequently asked questions

What is the mating half for this header?

The 98414-S06-40ULF mates with Minitek 2.00mm receptacle housings that accept the latch-holder fastening system. The header's 4-wall shrouding and keying slot guide alignment during mating.