Skip to main content
Log in
98424-F52-26ULF
Amphenol

98424-F52-26ULF Minitek 2.00mm Header, 26 Pos, Gold, SMT

MPN98424-F52-26ULF
Active

Amphenol ICC (FCI) Minitek® 2.00mm, Board to Board or Cable, Header, Male Pins, 26 circuits, 2 rows, 0.079" (2.00mm) pitch, shrouded - 4 wall, Surface Mount, Solder termination, Gold mating finish, 2A (AC/DC), 200V (AC/DC), UL94 V-0, Cream insulation.

$2.6965Ref. price · indicative, final on quote
98424-F52-26ULF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

98424-F52-26ULF Technical Specifications
ParameterValue
SeriesMinitek® 2.00mm
GenderMale Pin
Mounting typeSurface Mount
Connector typeHeader
Fastening typeLatch Holder
Voltage rating200V (AC/DC)
Current rating2A (AC/DC)
Contact materialCopper Alloy
Insulation colorCream
Insulation height0.244\" (6.20mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageTube
FeaturesKeying Slot
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions26
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact finish - matingGold
Contact length - mating0.157\" (4.00mm)
Contact finish thickness - post78.7µin (2.00µm)
Contact finish thickness - matingFlash

Product details

Current Rating and Contact Finish — Signal-Duty Profile

The 98424-F52-26ULF: The gold flash on the mating interface (contact finish thickness listed as flash) is sufficient for intermittent mating in controlled environments; for high-cycle applications (500+ mates), a thicker gold layer on the mating half is worth confirming.

Surface-Mount Termination and Board Layout

Termination is SMT solder — the header sits flat on the board surface without through-hole stubs. The 0.157" (4.00mm) mating pin length provides enough engagement depth for standard Minitek 2.00mm receptacles. Insulation height of 0.244" (6.20mm) sets the z-height budget above the board; plan the enclosure clearance accordingly.

Frequently asked questions

What is the mating connector for 98424-F52-26ULF?

This header mates with a Minitek 2.00mm receptacle housing (female, crimp or IDC type) of matching 26-position, dual-row configuration. Confirm the receptacle part number separately — the latch holder on this header requires a mating half with the corresponding latch feature.