2.00 mm Pitch, 30 Positions — Dense Signal Routing
The 98424-F52-30ALF: This Minitek 2.00mm header packs 30 circuits into a dual-row, 2.00 mm pitch layout — the board footprint is tight enough for dense signal routing but leaves room for trace escape on a two-layer board. Rated 2 A per circuit at 200 V AC/DC, this is a signal-level interconnect — suitable for control, data, and low-power distribution inside an enclosure.
Gold-Flash Mating, Latch Holder Retention
The 4-wall shrouding with keying slot prevents mis-mating and protects the pins during handling.
Surface-Mount Termination, Tape & Reel
The pick-and-place feature and Tape & Reel packaging mean it feeds straight into a placement machine; no hand-loading for volume builds. Insulation height is 0.244" (6.20 mm) above the board — the mated stack height depends on the mating receptacle, but this header sits low enough for most card-edge or mezzanine arrangements. The cream thermoplastic housing is UL94 V-0 rated for flame resistance inside equipment enclosures.