Skip to main content
Log in
98424-F52-50ALF — Amphenol product photo
Amphenol

98424-F52-50ALF Amphenol ICC Minitek 2.00mm 50-Pin Header

MPN98424-F52-50ALF
Active

Amphenol ICC (FCI) Minitek® 2.00mm header, 50 positions, 2 rows, 0.079" pitch, SMT, shrouded 4-wall, latch holder, gold flash mating, 2 A, 200 V, UL94 V-0 cream thermoplastic.

$2.6500Ref. price · indicative, final on quote
98424-F52-50ALF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

98424-F52-50ALF Technical Specifications
ParameterValue
SeriesMinitek® 2.00mm
GenderMale Pin
Mounting typeSurface Mount
Connector typeHeader
Fastening typeLatch Holder
Voltage rating200V (AC/DC)
Current rating2A (AC/DC)
Contact materialCopper Alloy
Insulation colorCream
Insulation height0.244\" (6.20mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesKeying Slot, Pick and Place
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions50
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact finish - matingGold
Contact length - mating0.157\" (4.00mm)
Contact finish thickness - post78.7µin (2.00µm)
Contact finish thickness - matingFlash

Product details

The 98424-F52-50ALF: The 0.157" mating pin length gives a solid wipe before the latch holder engages. Surface-mount termination with a pick-and-place feature and keying slot means the reel-fed assembly line can place it without a secondary operation.

Current and Contact Duty

The tin-plated solder post (78.7 µinch thickness) provides a reliable solder joint to the PCB pad. Copper alloy contact material carries the current with acceptable resistance for signal-level loads.

No stock-holding claim — quoted per RFQ.

Peer Comparison: 50 vs 18 Positions

For a BOM that needs fewer circuits, the 18-position variant saves board space and cost without changing the connector family or mating half.

Frequently asked questions

What is the mating half for 98424-F52-50ALF?

This is a shrouded header with a latch holder — it mates with a Minitek 2.00 mm receptacle housing that accepts the corresponding crimp terminals. The latch holder provides vibration-resistant retention when mated.