Amphenol ICC (FCI) Minitek 2.00mm series, 50-position, 2-row, shrouded male header, SMT termination, gold flash on mating contacts, latch holder, UL94 V-0, rated 2 A per contact at 200 V.
| Parameter | Value |
|---|---|
| Series | Minitek® 2.00mm |
| Gender | Male Pin |
| Mounting type | Surface Mount |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 200V (AC/DC) |
| Current rating | 2A (AC/DC) |
| Contact material | Copper Alloy |
| Insulation color | Cream |
| Insulation height | 0.244\" (6.20mm) |
| Insulation material | Thermoplastic |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Tube |
| Features | Keying Slot |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 2 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 50 |
| Row spacing - mating | 0.079\" (2.00mm) |
| Contact finish - post | Tin |
| Contact finish - mating | Gold |
| Contact length - mating | 0.157\" (4.00mm) |
| Contact finish thickness - post | 78.7µin (2.00µm) |
| Contact finish thickness - mating | Flash |
The 98424-F52-50ULF: Each contact is rated 2 A at 200 V AC/DC — typical for signal-level loads in control boards, I/O modules, and internal harnesses where the current per circuit stays under the derating ceiling.
No official pin-compatible substitute or successor is listed from the original manufacturer.
The latch holder engages with the mating half's latch feature — verify the receptacle includes a latch-compatible profile.
The pitch is 2.00 mm on both the pin-to-pin and row spacing, with 50 positions loaded in two rows.
RoHS compliance is standard for this series; the contact plating is gold flash over tin on the post, with no restricted substances listed in the spec record.
The keying slot on this header requires a matching key on the receptacle side.