The 98424-S52-24LF: 24 positions loaded all, dual-row layout means 12 per row — the connector body is 0.244" (6.20mm) tall off the board, which leaves room under a mezzanine or cable assembly without blocking adjacent components.
Current and Contact Grade
Copper alloy pins with square cross-section — the square pin gives a consistent four-point contact beam in the mating receptacle, which keeps contact resistance stable over temperature cycling.
Shrouded 4-wall with a latch holder — the shroud protects the pins during blind mating, and the latch locks the mating half in place against vibration or cable tug. The keying slot prevents reverse insertion. 0.157" (4.00mm) mating pin length — long enough for a standard receptacle to fully engage the contact beam, but short enough to keep the mated stack height under 10mm with a typical IDC or crimp socket.
UL94 V-0 thermoplastic housing — flame-rated for equipment inside an enclosure. Cream insulator colour is standard for the Minitek series.