Skip to main content
Log in
F51L-1A7H1-11010 — Amphenol product photo
Amphenol

F51L-1A7H1-11010 FFC/FPC Connector 10-Pin 1.00mm Pitch ZIF

MPNF51L-1A7H1-11010
Active

Amphenol ICC (FCI) Aorora F51L series, 10-position, 1.00mm pitch, right-angle SMT ZIF FFC/FPC connector, 0.5A per contact, 50V, gold flash, flip lock, active production.

$0.5000Ref. price · indicative, final on quote
F51L-1A7H1-11010 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

F51L-1A7H1-11010 Technical Specifications
ParameterValue
SeriesAorora F51L
Mounting typeSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)
Actuator materialPolyamide (PA9T), Nylon 9T, Halogen Free
Height above board0.100\" (2.54mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureFlip Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions10
Contact finish thickness1.97µin (0.050µm)

Product details

10-Position, 1.00mm Pitch ZIF FFC/FPC Connector

The F51L-1A7H1-11010 is a 10-position, 1.00mm pitch FFC/FPC connector from the Aorora F51L series by Amphenol ICC (FCI). Rated 0.5A per contact at 50V, this is a signal-level interconnect — fine for digital I/O, sensor signals, or display ribbon cables. The 1.97 µinch gold flash on the contact surface gives moderate corrosion protection and supports the rated 30 mating cycles.

Cable Fit and Termination Details

The cable end type can be straight or tapered — both work with the ZIF mechanism. The bottom-contact design means the cable inserts with the conductors facing down toward the PCB.

Frequently asked questions

What FFC cable thickness works with F51L-1A7H1-11010?

This connector accepts FFC or FPC cables with a thickness of 0.30mm or 0.33mm. The cable end can be straight or tapered.