Skip to main content
Log in
Amphenol F52L-1A7A1-11016 — FFC / FPC Cable Assemblies

F52L-1A7A1-11016 FFC/FPC Connector – 1.00mm Pitch, 16 Pos

MPNF52L-1A7A1-11016
Active

Amphenol ICC (FCI) Aorora F52L series, F52L-1A7A1-11016 — 16-position, 0.039" (1.00mm) pitch FFC/FPC connector, vertical 1-sided contact, tin-plated phosphor bronze, slide lock, UL94 V-0 LCP housing, 0.5 A, 50 V, 30 mating cycles.

$0.5300Ref. price · indicative, final on quote
Amphenol F52L-1A7A1-11016 datasheet (PDF)
RoHSRoHS Compliant
SeriesAorora F52L
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

F52L-1A7A1-11016 key specifications
ParameterValue
SeriesAorora F52L
MountingSurface Mount
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Vertical - 1 Sided
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled

All specifications

F52L-1A7A1-11016 additional specifications
ParameterValue
Height above board0.198\" (5.04mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
TerminationSolder
Mating cycles30
Contact finishTin
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions16
Contact finish thickness80.0µin (2.03µm)

Product details

The F52L-1A7A1-11016: The 0.039" (1.00mm) pitch sets the pad spacing on the PCB and the minimum trace width for the FPC tail routing. With 16 positions, the connector spans about 16 mm of board edge — a standard footprint for a mid-density signal interface.

Current, Voltage, and the Tin Contact Trade-off

The tin-on-tin contact interface (80.0 µin / 2.03 µm thickness) limits the connector to 30 mating cycles before wear-through risks increasing contact resistance.

Slide Lock and Solder Retention for Assembly

The slide lock secures the FPC tail after insertion — no secondary latch needed.

The vertical 1-sided contact arrangement means the cable contacts face one direction — confirm the cable routing before soldering. Termination is solder-only; no press-fit or solderless option.

Frequently asked questions

What is the pitch of F52L-1A7A1-11016?

The pitch is 0.039" (1.00mm). This sets the PCB pad spacing and the minimum trace width for the FPC tail.

What is the closest functional second-source — F52L-1A7A1-11018?

F52L-1A7A1-11018 is a same-series sibling with 18 positions instead of 16. Pitch, height, current rating, plating, and locking feature are identical. It is not a pin-compatible replacement — the extra two positions change the footprint — but it shares the same tooling and cable thickness range.

How many mating cycles does F52L-1A7A1-11016 support?

30 mating cycles. The tin-on-tin contact finish wears faster than gold; this connector is suited for infrequent reconnections, not repeated field-service cycling.