Skip to main content
Log in
FA1-NDRP-PCBT10 — Amphenol product photo
Amphenol

FA1-NDRP-PCBT10 SMB Fakra Plug, 50 Ohm, 6 GHz

MPNFA1-NDRP-PCBT10
Active

SMB Fakra plug, male pin, 50 Ohm impedance, 6 GHz max frequency, 1 port, through hole right angle mount, solder termination, gold-plated center contact, 100 mating cycles, locking ramp.

$3.6100Ref. price · indicative, final on quote
FA1-NDRP-PCBT10 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

FA1-NDRP-PCBT10 Technical Specifications
ParameterValue
Mounting typeThrough Hole, Right Angle
Connector typePlug, Male Pin
Fastening typeLocking Ramp
Frequency - max6 GHz
Operating temperature-40°C~100°C
Body materialZinc Die Cast
Housing colorViolet, Claret
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
PackageTray
FeaturesCode D
Impedance50Ohm
Body finishTin
Mating cycles100
Number of ports1
Shield terminationSolder
Contact terminationSolder
Center contact platingGold

Product details

50 Ohm SMB Fakra Plug, Right Angle PCB Mount

The FA1-NDRP-PCBT10: The gold-plated brass center contact and PTFE dielectric maintain a controlled impedance through the launch, while the zinc die-cast body with tin finish provides RF shielding.

Impedance and Frequency Range

The 6 GHz maximum frequency covers common cellular bands (LTE, 5G sub-6 GHz), Wi-Fi 6E, and GNSS. For designs requiring higher bandwidth, this connector will limit the signal path; for applications within 6 GHz, the impedance match is the critical parameter to verify against the trace and cable characteristic impedance.

Mating Cycles and Contact Plating

For applications needing frequent disconnection, consider a connector with a higher cycle rating; for a one-time install, 100 cycles is ample headroom.

The center contact and shield are both solder-terminated, requiring a soldering step for the shield ground connection.

Frequently asked questions

What is the FA1-NDRP-PCBT10 impedance?

The FA1-NDRP-PCBT10 is a 50 Ohm SMB Fakra plug, designed for 50 Ohm RF systems.

What is the FA1-NDRP-PCBT10 mounting type?

The FA1-NDRP-PCBT10 uses through hole right angle mounting, soldering the pins and shield to the PCB.

What is the mating cycles of FA1-NDRP-PCBT10?

The FA1-NDRP-PCBT10 is rated for 100 mating cycles.