Amphenol FA1-NZSP-C04-1, SMB Fakra plug male pin, 50 Ohm, 4 GHz, 1 port, panel mount flange, crimp termination, gold center contact, nickel body, -40°C to 100°C.
| Parameter | Value |
|---|---|
| Mounting type | Panel Mount |
| Connector type | Plug, Male Pin |
| Fastening type | Locking Ramp |
| Frequency - max | 4 GHz |
| Mounting feature | Flange |
| Cable group | RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, 9907 |
| Operating temperature | -40°C~100°C |
| Body material | Brass |
| Housing color | Blue, Water |
| Dielectric material | Polytetrafluoroethylene (PTFE) |
| Center contact material | Brass |
| Package | Bulk |
| Features | Code Z |
| Includes | 3 pcs - 1 Connector, 1 Contact, 1 Ferrule |
| Impedance | 50Ohm |
| Body finish | Nickel |
| Mating cycles | 100 |
| Insertion loss | 0.3dB |
| Number of ports | 1 |
| Shield termination | Crimp |
| Contact termination | Crimp |
| Center contact plating | Gold |
The FA1-NZSP-C04-1: This plug accepts RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, and 9907 cables. Crimp the shield through the ferrule and the center conductor into the pin — the assembly mates with a standard SMB Fakra jack.
The locking ramp keeps the pair mated under moderate vibration — not a high-cycle disconnect connector, but solid for a semi-permanent RF link.
The FA1-NZSP-C04-1 is a 50 Ohm connector, standard for RF signal paths.
It accepts RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, and 9907 cables.
Yes, the kit includes one connector, one contact, and one ferrule.