Skip to main content
Log in
Amphenol SLW24R-1C7LF — FFC / FPC Cable Assemblies

SLW24R-1C7LF Amphenol ICC (FCI) FFC/FPC Connector, 24 Pos

MPNSLW24R-1C7LF
Active

Amphenol ICC (FCI) SLW-R FFC/FPC connector, order code SLW24R-1C7LF, 24 positions, 0.039" (1.00mm) pitch, bottom contacts, tin-plated phosphor bronze, through-hole right-angle, solder termination, ZIF flip lock.

$0.6900Ref. price · indicative, final on quote
Amphenol SLW24R-1C7LF datasheet (PDF)
RoHSRoHS Compliant
SeriesSLW-R
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

SLW24R-1C7LF key specifications
ParameterValue
SeriesSLW-R
MountingThrough Hole, Right Angle
Cable end typeNotched or Tabbed
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating100V
Current rating1A
Operating temperature-55°C~85°C
Housing colorBlack
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialPolyamide (PA), Nylon, Glass Filled

All specifications

SLW24R-1C7LF additional specifications
ParameterValue
Actuator materialPolyamide (PA), Nylon, Glass Filled
Height above board0.157\" (4.00mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTray
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles20
Contact finishTin
Locking featureFlip Lock
FFC, FCB thickness0.30mm
Positions24

Product details

ZIF flip-lock, 24 circuits, 1.00 mm pitch

The SLW24R-1C7LF is the 24-position member of Amphenol ICC (FCI)'s SLW-R FFC/FPC connector line, using a zero-insertion-force (ZIF) flip-lock actuator that accepts 0.30 mm-thick notched or tabbed flat flex cable.

Actuator and cable prep

The flip-lock actuator pivots open to accept the FFC or FPC, then snaps closed to hold the cable without insertion force — the contact beam wipes the pad on closure. The connector requires a notched or tabbed cable end; the solder retention feature holds the connector body during reflow.