Skip to main content
Amphenol 10072353-G01-09ULF

10072353-G01-09ULF Amphenol ICC Minitek 2.00mm 18-Pin

MPN 10072353-G01-09ULF
Active

Amphenol ICC (FCI) Minitek® 2.00mm, 18-position, dual-row, unshrouded male header, right-angle through-hole termination, 30.0µin gold GXT™ on mating contacts, rated 3 A per circuit at 200 V (AC/DC).

$1.6171 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

10072353-G01-09ULF key specifications
ParameterValue
SeriesMinitek® 2.00mm
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating200V (AC/DC)
Current rating3A
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.157\" (4.00mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0

All specifications

10072353-G01-09ULF additional specifications
ParameterValue
StyleBoard to Board
PackageTube
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions18
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.079\" (2.00mm)
Contact finish - matingGold, GXT™
Contact length - mating0.157\" (4.00mm)
Contact finish thickness - post78.7µin (2.00µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Board Fit and Routing Constraints

The 10072353-G01-09ULF: The right-angle orientation means the header stands 0.157" (4.00mm) above the board surface at the insulator, with the mating pin extending another 0.157" (4.00mm) beyond that. The solder tails are 0.079" (2.00mm) long — enough for a standard 1.6mm PCB with good through-hole fill. Push-pull fastening means there is no latch or lock — the retention comes from the friction fit of the mating receptacle's contacts. In a vibration environment, a secondary retention method (wire tie or potting) may be needed unless the mating half includes its own locking feature.

MPN
10072353-G01-09ULF