Skip to main content
Amphenol 112533RP

Amphenol 112533RP RP-BNC Plug, 50 Ohm, 4 GHz, Crimp

MPN 112533RP
Active

Amphenol RP-BNC plug, female socket, 50 Ohms, 4 GHz, 500 V, crimp termination, bayonet lock, includes 3 pcs (connector, contact, ferrule), bulk.

$10.4565 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

112533RP key specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typePlug, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Cable groupBelden 9258, LMR-240
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialPhosphor Bronze
PackageBulk

All specifications

112533RP additional specifications
ParameterValue
Includes3 pcs - 1 Connector, 1 Contact, 1 Ferrule
Impedance50 Ohms
Body finishNickel
Mating cycles500
Insertion loss0.2dB
Number of ports1
Shield terminationCrimp
Contact terminationCrimp
Center contact platingGold

Product details

RP-BNC Plug for Belden 9258 and LMR-240

The Amphenol 112533RP is a reverse-polarity BNC (RP-BNC) plug with a female socket centre contact, designed for free-hanging in-line cable termination. The connector is specced for Belden 9258 and LMR-240 cable groups — two common 50-Ohm coax types used in LMR and equivalent low-loss runs. The PTFE dielectric holds stable across that span, and the gold-plated phosphor bronze centre contact resists corrosion through repeated field connects.

Crimp Termination and Cable Fit

The shield termination is crimped over the ferrule, which is included in the kit. For Belden 9258 and LMR-240, the crimp die selection follows the standard hex sizes for those cable diameters; the connector body is brass with nickel finish, so the crimp barrel takes a clean set without cracking the plating. For a base station antenna feed that gets swapped every few years, or test cabling that sees weekly changes, 500 cycles is a comfortable margin before the gold plating on the centre contact starts to show wear.

MPN
112533RP