Skip to main content
Amphenol 142288

Amphenol 142288 SMB Plug Kit, RG-178/196, 50 Ohm, 3 GHz

MPN 142288
Active

Amphenol SMB plug kit, 50 Ohm, 3 GHz, for RG-178/196 coax, includes connector, ferrule, end cap, heat shrink, insulator, nickel-plated brass body, gold-plated beryllium copper center contact, solder contact termination, crimp shield termination, snap-on fastening, 500 mating cycles.

$14.0584 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

142288 key specifications
ParameterValue
MountingFree Hanging (In-Line), Right Angle
Connector typePlug, Female Socket
Fastening typeSnap-On
Voltage rating335 V
Frequency - max3 GHz
Cable groupRG-178, 178A, 178B, 196, 196A, M17/93-RG178
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
Includes5 pcs - 1 Connector, 1 End Cap, 1 Ferrule, 1 Heat Shrink, 1 Insulator

All specifications

142288 additional specifications
ParameterValue
Impedance50 Ohms
PackageBag
Body finishNickel
Mating cycles500
Insertion loss0.6dB
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

The Amphenol 142288 is an SMB plug kit — a field-assembly set for terminating small-diameter RG-178, RG-196, and equivalent coax cables (M17/93-RG178). SMB is a snap-on, subminiature interface rated to 3 GHz with a 50 Ohm characteristic impedance, commonly used in GPS modules, cellular antennas, test equipment, and RF module interconnects where board space is tight and quick disconnect is useful.

Cable Prep and Termination Sequence

This plug terminates RG-178, RG-178B, RG-196, RG-196A, or M17/93-RG178 coax. The centre contact is solder-terminated — tin the exposed centre conductor and flow solder through the contact barrel. The shield is crimped using the supplied ferrule; the included heat shrink covers the ferrule-to-jacket transition for strain relief and environmental seal. The end cap threads over the assembly and the insulator sits between the centre contact and the body.

RF Performance and Mechanical Limits

The right-angle, free-hanging mounting suits tight cable routing where a straight plug would stress the connector-to-cable junction.

MPN
142288