The Amphenol 142288 is an SMB plug kit — a field-assembly set for terminating small-diameter RG-178, RG-196, and equivalent coax cables (M17/93-RG178). SMB is a snap-on, subminiature interface rated to 3 GHz with a 50 Ohm characteristic impedance, commonly used in GPS modules, cellular antennas, test equipment, and RF module interconnects where board space is tight and quick disconnect is useful.
Cable Prep and Termination Sequence
This plug terminates RG-178, RG-178B, RG-196, RG-196A, or M17/93-RG178 coax. The centre contact is solder-terminated — tin the exposed centre conductor and flow solder through the contact barrel. The shield is crimped using the supplied ferrule; the included heat shrink covers the ferrule-to-jacket transition for strain relief and environmental seal. The end cap threads over the assembly and the insulator sits between the centre contact and the body.
RF Performance and Mechanical Limits
The right-angle, free-hanging mounting suits tight cable routing where a straight plug would stress the connector-to-cable junction.
