Skip to main content
Amphenol 172177

172177 Amphenol RF N-Type Plug, 50 Ohm, 11 GHz, Right Angle

MPN 172177
Active

Amphenol RF N-Type plug, male pin, 50 Ohm, 11 GHz, 1500 V, right angle free-hanging, solder contact, crimp shield, includes connector + end cap + ferrule.

$20.1900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

172177 key specifications
ParameterValue
MountingFree Hanging (In-Line), Right Angle
Connector typePlug, Male Pin
Fastening typeThreaded
Voltage rating1500 V
Frequency - max11 GHz
Cable groupRG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, 9907
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorSilver
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBrass
Includes3 pcs - 1 Connector, 1 End Cap, 1 Ferrule

All specifications

172177 additional specifications
ParameterValue
Impedance50 Ohms
PackageBag
Body finishWhite Bronze
Mating cycles500
Insertion loss0.15dB
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

The 172177: It sits in the standard N-type 50 Ohm interface family, delivering a rated impedance of 50 Ohms and a maximum operating frequency of 11 GHz — well above the typical 10 GHz ceiling of many N-type plugs, so it holds the bandwidth for modern RF links without the insertion loss climbing early. You get everything needed to complete one cable assembly in a single order code — no guessing which ferrule fits. The right-angle body routes the cable exit perpendicular to the connector axis, which is the standard choice when the cable needs to fold flat against a panel or chassis wall.

RF Interface and Cable Fit

Cable groups include RG-58, 58A, 58B, 58C, 141, 303, LMR-195, Belden B7806A, and 9907. That covers the common thin and medium-diameter coax used in test leads, short antenna feeds, and indoor base-station runs. If your cable is not on this list, check the diameter and dielectric fit — the crimp ferrule and end cap are sized for this group. The shield is terminated by crimp, and the center contact by solder. Crimp gives a strong, repeatable mechanical grip on the braid; solder on the pin ensures a gas-tight electrical joint at the signal path.

Insertion loss is listed at 0.15 dB — a tight figure that keeps signal power from bleeding off across the joint. The threaded fastening type ensures the pair stays mated under vibration or cable tug; the knurled coupling nut is the standard N-type interface.

MPN
172177