Skip to main content
Amphenol 31-10-RFX

31-10-RFX BNC Jack, 50 Ohm, 4 GHz, Panel Mount

MPN 31-10-RFX
Active

Amphenol RF 31-10-RFX, BNC jack female socket, 50 Ohm, 4 GHz, panel mount bulkhead, silver-plated phosphor bronze center contact, solder cup termination, includes lockwasher and nut.

$5.2500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

31-10-RFX key specifications
ParameterValue
MountingPanel Mount
Connector typeJack, Female Socket
Fastening typeBayonet Lock
Voltage rating500 V
Frequency - max4 GHz
Mounting featureBulkhead - Rear Side Nut
Operating temperature-65°C~165°C
Body materialBrass
Housing colorSilver, White
Dielectric materialPolyamide (PA), Nylon
Center contact materialPhosphor Bronze
PackageBulk

All specifications

31-10-RFX additional specifications
ParameterValue
FeaturesIsolated
Includes3 pcs - 1 Connector, 1 Lockwasher, 1 Nut
Impedance50Ohm
Body finishNickel
Mating cycles500
Insertion loss0.2dB
Number of ports1
Shield terminationSolder
Contact terminationSolder Cup
Center contact platingSilver

Product details

The 31-10-RFX: It includes the connector, a lockwasher, and a nut — three pieces that cover the mounting hardware in one order code.

RF Performance and Signal Path Limits

The 4 GHz ceiling means it covers the full VHF/UHF band and well into the lower microwave range; above that frequency the BNC interface geometry starts to radiate and the insertion loss climbs past the rated 0.2 dB. The silver-plated phosphor bronze center contact keeps the RF path low-loss and oxidation-resistant for the signal levels this connector sees.

Mounting and Termination — What Ships in the Bag

The 31-10-RFX is a rear-side-nut bulkhead mount: the jack body passes through the panel hole, the lockwasher and nut tighten from the rear. The shield termination is solder — you tin the braid and flow it into the cup — and the center contact uses a solder cup as well, so this is a hand-assembly job, not a crimp operation.

Rated for 500 mating cycles — that is a solid number for a bayonet-lock connector on a test panel or a piece of portable field gear that gets connected and disconnected a few times a week. The silver plating on the center contact helps here: silver has good cycle life under moderate insertion force, and the bayonet lock distributes the mating load evenly across the coupling nut rather than the center pin. After 500 cycles the contact resistance may start to drift; for higher-cycle applications a gold-plated BNC would be the better call.

Voltage and Environment — What the 500 V Rating Means

In practice, at 4 GHz the RF voltage swing is usually well below 500 V peak, so the voltage rating is a safety margin for DC bias or low-frequency AC that might ride on the RF line.

MPN
31-10-RFX