Skip to main content
Amphenol 901-10754

901-10754 Amphenol RF SMA Jack, 50 Ohm, 6 GHz, Bulkhead

MPN 901-10754
Active

Amphenol RF SMA jack, female socket, 50 Ohms, DC to 6 GHz, bulkhead front-side nut mount, crimp shield, solder center contact, for 1.13mm coaxial cable, gold body, 500 mating cycles.

$14.5500 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

901-10754 key specifications
ParameterValue
MountingPanel Mount
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating335 V
Frequency - max6 GHz
Mounting featureBulkhead - Front Side Nut
Cable group1.13mm Coaxial Cable
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper

All specifications

901-10754 additional specifications
ParameterValue
PackageBag
Impedance50 Ohms
Body finishGold
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

It terminates 1.13mm coaxial cable with a crimp shield and solder center contact. Rated to 6 GHz with a PTFE dielectric and gold-plated brass body, this connector suits RF applications where a compact, threaded, vibration-resistant interface is needed — think antenna feeds, test points, or panel pass-throughs in instrumentation and wireless infrastructure.

The 6 GHz upper frequency covers common bands like 2.4/5 GHz Wi-Fi, GPS /L2, and ISM applications, but it won't support full SMA bandwidth to 18 GHz. The crimp shield termination is field-repairable with a standard hex crimp tool — you can re-terminate a damaged cable end on site without replacing the whole harness. The solder center pin requires a soldering iron; plan for that in the assembly workflow.

MPN
901-10754