Skip to main content
Amphenol L77SDEG09SOL2RM5

Amphenol L77SDEG09SOL2RM5 D-Sub Receptacle, 9 Pos, Solder

MPN L77SDEG09SOL2RM5
Active

Amphenol SD series D-Sub receptacle, 9 positions, 2 rows, female sockets, through-hole solder termination, board lock, gold flash contacts, 3A, 250V, UL94 V-0.

$1.6400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesSD
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

L77SDEG09SOL2RM5 key specifications
ParameterValue
SeriesSD
TypeSignal
MountingThrough Hole
Connector typeReceptacle, Female Sockets
Voltage rating250V
Current rating3A
Contact formStamped
Shell size, connector layout1 (DE, E)
Operating temperature-55°C ~ 125°C
ColorBlack
Contact materialPhosphor Bronze
Dielectric materialThermoplastic, Glass Filled

All specifications

L77SDEG09SOL2RM5 additional specifications
ParameterValue
Shell material, finishSteel, Tin Plated
Material flammability ratingUL94 V-0
PackageTray
FeaturesBoard Lock
TerminationSolder
Contact finishGold
Flange featureBoard Side (M3)
Rows2
Positions9
Contact finish thicknessFlash

Product details

Board-Mount D-Sub for Control Panels and I/O

The Amphenol L77SDEG09SOL2RM5 is a 9-position D-Sub receptacle from the SD series, configured as a vertical through-hole female socket with board locks. It uses a stamped phosphor bronze contact with gold flash plating — enough for routine mating in a panel or test fixture, not a high-cycle field-service connector. The steel shell is tin-plated for EMI continuity when mated to a conductive panel or a matching D-Sub plug. The board-side flange accepts an M3 screw for panel-mount retention.

The 3 A per-contact rating is the practical ceiling for signal and low-power control circuits — think PLC I/O, sensor interfaces, or serial data links. At 250 V, the voltage rating is generous for these duties; the current limit is what governs the wire gauge and circuit count on the board. Without it, the solder joints carry the full mechanical load — the lock takes that off the pins.

MPN
L77SDEG09SOL2RM5