Skip to main content
JST B08B-PNISK-1A

JST B08B-PNISK-1A 2mm Pitch 8-Pin Shrouded Header

MPN B08B-PNISK-1A
Active

JST PNI series, B08B-PNISK-1A, Board to Cable/Wire Header, 8 Positions, 2.00mm Pitch, Through Hole, Shrouded - 4 Wall, Latch Lock, Tin Contacts, 3A, 100V

$0.7700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS non-compliant
IncotermsDAP / DDP Available
SeriesPNI
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

B08B-PNISK-1A key specifications
ParameterValue
SeriesPNI
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Lock
Voltage rating100V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.402\" (10.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled

All specifications

B08B-PNISK-1A additional specifications
ParameterValue
Mated stacking heights12.25mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions8
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

Board footprint and mating fit

The B08B-PNISK-1A: This is an 8-position, single-row header on 2.00 mm pitch, so the board footprint is 16 mm wide plus the keep-out for the shroud. The through-hole termination uses a press-fit solder tail — the 0.134" (3.40 mm) post length is meant for a standard 1.6 mm PCB thickness. The 4-wall shroud and latch lock protect the male pins from damage during mating and hold the cable-side receptacle in place under vibration. Mated stack height is 12.25 mm, which sets the clearance between the PCB and the cable connector body.

Current and voltage ceiling

Rated 3 A per contact at 100 V, with tin-on-tin contact finish. Tin plating is cost-effective for moderate mating cycles — expect 50 to 100 cycles before wear starts to show. The operating range is -25°C to 85°C, so it works in indoor equipment but not in an engine bay or outdoor cabinet without climate control.

MPN
B08B-PNISK-1A