Skip to main content
JST B22B-PADSS-1

B22B-PADSS-1 JST PAD Header 22 Pos 2mm Shrouded Locking Ramp

MPN B22B-PADSS-1
Active

JST PAD series, Board to Cable/Wire, Header, 22 positions, 2.00mm pitch, Through Hole, Solder termination, Shrouded - 4 Wall, Locking Ramp, Tin contacts, 3 A, 250 V, UL94 V-0.

$1.3800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS non-compliant
IncotermsDAP / DDP Available
SeriesPAD
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

B22B-PADSS-1 key specifications
ParameterValue
SeriesPAD
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.402\" (10.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled

All specifications

B22B-PADSS-1 additional specifications
ParameterValue
Mated stacking heights12.4mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions22
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

22-position 2.00mm pitch header with locking ramp

The B22B-PADSS-1: This is a JST PAD series header, 22 positions in two rows on a 2.00mm pitch, rated 3 A per contact at 250 V. The 4-wall shrouding protects the male pins during handling and guides the mating receptacle into alignment.

Through-hole mounting and board layout fit

The header mounts through-hole with solder termination. The 12.4mm mated stack height is the total height from the PCB surface to the top of the mated receptacle, which sets the clearance needed above the board in the enclosure.

Material and environmental ratings

The operating temperature range is -25°C to 85°C, covering most indoor and sheltered outdoor environments.

MPN
B22B-PADSS-1