Skip to main content
Molex 5024264030

Molex SlimStack 5024264030 Receptacle, 40 Pos, 0.40mm Pitch

MPN 5024264030
Active

Molex SlimStack 502426 series, 5024264030 receptacle, 40 positions, 0.40mm pitch, 2 rows, 1mm mated stack height, surface mount, gold-plated contacts, solder retention.

$1.9900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesSlimStack 502426
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5024264030 specifications
ParameterValue
SeriesSlimStack 502426
MountingSurface Mount
Connector typeReceptacle, Center Strip Contacts
Height above board0.039\" (1.00mm)
Mated stacking heights1mm
Pitch0.016\" (0.40mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
Contact finishGold
Rows2
Positions40
Contact finish thickness4.00µin (0.100µm)

Product details

Board-to-Board Mezzanine Connector for Tight Stacking

It uses a 0.40mm pitch and a 1mm mated stack height, which means two PCBs sit exactly 1mm apart when mated — a common spacing for ultra-thin handheld or wearable devices where every tenth of a millimeter counts.

What the 0.40mm Pitch and 1mm Stack Height Mean for Your Layout

Your board-to-board spacing is exactly 1mm, so the mating header must also be from the SlimStack 502426 series at the same stack height. The 40 positions in 2 rows give you 20 contacts per row, which matches a 40-circuit BOM line — confirm your circuit count before layout. It is not a heavy-duty automotive or industrial gold; if your application calls for frequent disconnect/reconnect or a corrosive atmosphere, consider a thicker plating option in the series. The solder retention feature means the connector has small tabs that reflow-solder to the board, holding it in place during the SMT process and resisting shear forces from cable strain or thermal cycling. This is a practical advantage over connectors without retention — it prevents tombstoning and keeps the connector flat on the pad.

Both halves are surface-mount only — no through-hole option. The connector is soldered to the board in a standard reflow oven; no press-fit or crimp termination. Confirm the header part number for your specific position count before ordering.

MPN
5024264030