Skip to main content
Molex 5034801000

5034801000 Molex FPC Connector, 10 Pos, 0.5mm Pitch, Active

MPN 5034801000
Active

Molex 5034801000, BackFlip Easy-On 503480 FHB1 series, FPC connector, 10 positions, 0.50mm pitch, right-angle SMT, gold contacts, flip lock, -40°C to 85°C, 0.5A per contact.

$1.0900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBackFlip, Easy-On 503480 FHB1
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5034801000 key specifications
ParameterValue
SeriesBackFlip, Easy-On 503480 FHB1
MountingSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top and Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-40°C ~ 85°C
Housing colorWhite
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled

All specifications

5034801000 additional specifications
ParameterValue
Actuator materialPolyamide (PA), Nylon, Glass Filled
Height above board0.039\" (1.00mm)
Material flammability ratingUL94 V-0, UL94 HB
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention
TerminationSolder
Mating cycles10
Contact finishGold
Locking featureFlip Lock, Backlock
FFC, FCB thickness0.30mm
Positions10
Contact finish thickness3.94µin (0.10µm)

Product details

Molex 5034801000 is a 10-position, 0.50mm pitch FPC connector from the BackFlip, Easy-On 503480 FHB1 series. It's a right-angle surface-mount part with a flip-lock actuator that secures the FPC without a secondary latch. Rated 0.5A per contact at 50V, with gold-plated phosphor bronze contacts — the gold finish handles the 10 mating cycles typical of an internal harness connection that's mated once and rarely re-entered. The housing is white LCP, glass-filled, rated UL94 V-0 and UL94 HB; the actuator is black nylon.

The connector accepts FPC thickness of 0.30mm, with contacts on top and bottom — so the FPC can have pads on either side.

Current rating and mating cycle reality

0.5A per contact is the current ceiling — at 0.50mm pitch, the contact beam cross-section limits current more than the contact material. This is a signal-level connector, not a power interconnect. 10 mating cycles means this is a set-and-forget connection. If your design needs frequent reconnection (e.g., test points, field-service cables), look for a connector with a higher cycle rating.

MPN
5034801000