Molex 5034801000 is a 10-position, 0.50mm pitch FPC connector from the BackFlip, Easy-On 503480 FHB1 series. It's a right-angle surface-mount part with a flip-lock actuator that secures the FPC without a secondary latch. Rated 0.5A per contact at 50V, with gold-plated phosphor bronze contacts — the gold finish handles the 10 mating cycles typical of an internal harness connection that's mated once and rarely re-entered. The housing is white LCP, glass-filled, rated UL94 V-0 and UL94 HB; the actuator is black nylon.
The connector accepts FPC thickness of 0.30mm, with contacts on top and bottom — so the FPC can have pads on either side.
Current rating and mating cycle reality
0.5A per contact is the current ceiling — at 0.50mm pitch, the contact beam cross-section limits current more than the contact material. This is a signal-level connector, not a power interconnect. 10 mating cycles means this is a set-and-forget connection. If your design needs frequent reconnection (e.g., test points, field-service cables), look for a connector with a higher cycle rating.