Skip to main content
Molex 5047543720

Molex 5047543720 – 37-position 0.30 mm pitch FPC connector

MPN 5047543720
Active

Molex BackFlip, Easy-On LA75 504754 series, FPC connector, 37 positions, 0.012" (0.30 mm) pitch, surface mount right-angle, gold-plated contacts, flip-lock actuator, 0.2 A per contact, 50 V rating.

$1.9300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS non-compliant
IncotermsDAP / DDP Available
SeriesBackFlip, Easy-On LA75 504754
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5047543720 key specifications
ParameterValue
SeriesBackFlip, Easy-On LA75 504754
MountingSurface Mount, Right Angle
Cable end typeTapered
Flat flex typeFPC
Connector (Contact type)Contacts, Top and Bottom
Voltage rating50V
Current rating0.2A
Operating temperature-40°C ~ 85°C
Housing colorBlack
Actuator colorGray
Contact materialCopper Alloy
Housing materialLiquid Crystal Polymer (LCP), Glass Filled

All specifications

5047543720 additional specifications
ParameterValue
Actuator materialPolyamide (PA), Nylon, Glass Filled
Height above board0.030\" (0.75mm)
Material flammability ratingUL94 V-0
Pitch0.012\" (0.30mm)
PackageTape & Reel (TR) Cut Tape (CT)
TerminationSolder
Mating cycles10
Contact finishGold
Locking featureFlip Lock, Backlock
FFC, FCB thickness0.20mm
Positions37
Contact finish thickness3.94µin (0.10µm)

Product details

The 5047543720 is a 37-position FPC connector from the Molex BackFlip, Easy-On LA75 504754 series, built for tight board-edge routing at 0.30 mm pitch. It terminates to a 0.20 mm thick FPC with a flip-lock actuator that secures the cable without a secondary latch. Contacts on both top and bottom of the FPC allow a single-sided or double-sided circuit pattern, which is typical for camera modules, display interfaces, and compact handheld devices.

Pitch and current – the trade-off at 0.30 mm

At 0.30 mm pitch, the 37 positions fit in a connector body just over 11 mm wide, but the fine pitch limits the per-contact current rating to 0.2 A. The 50 V voltage rating matches the insulation capability of the LCP housing and the 0.30 mm contact spacing.

Rated for 10 mating cycles, which is standard for a gold-flash finish at 3.94 µin thickness – enough for one-time assembly and occasional rework, but not for repeated field disconnect. The gold over copper alloy contact material resists oxidation during storage, but after 10 cycles the gold flash wears and the underlying copper may expose, increasing contact resistance.

Note: this part is RoHS non-compliant per the manufacturer listing; verify your assembly's exemption requirements before committing.

MPN
5047543720