Skip to main content
Molex 743209010

Molex MicroCross 743209010 DVI-I Dual Link Receptacle

MPN 743209010
Active

Molex MicroCross 74320 series, DVI-I Dual Link receptacle, 29 contacts, 3A per contact, 40VAC, shielded, right-angle PCB mount, board lock, solder termination, ROHS3 compliant.

$5.68 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesMicroCross 74320
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

743209010 key specifications
ParameterValue
SeriesMicroCross 74320
MountingPanel Mount, Through Hole, Right Angle
Connector typeDVI-I, Dual Link
Voltage - rated40VAC
Current rating3A per Contact
Positions29
Mounting featureFlange, Horizontal
Operating temperature-20°C ~ 85°C
Insulation colorNatural
Shell (Shielding material)Steel
Material flammability ratingUL94 V-0
GenderReceptacle

All specifications

743209010 additional specifications
ParameterValue
PackageTray
FeaturesBoard Lock
ShieldingShielded
TerminationSolder
Mating cycles100
Contact finishGold
Number of ports1

Product details

What This DVI-I Dual-Link Receptacle Does in the Assembly

The Molex 743209010 is a DVI-I dual-link receptacle from the MicroCross 74320 series, designed to carry both digital and analog video signals over a single interface. With 29 contacts, it provides the full pinout for dual-link DVI, supporting higher resolutions and longer cable runs than single-link variants. The right-angle orientation and panel-mount flange let it sit flush against a bracket or enclosure wall, while the through-hole solder tails anchor it to the PCB. The steel shield and board lock keep the connector mechanically stable during mating and under cable strain.

Rated 3A per contact at 40VAC, the current capacity is adequate for the power and auxiliary pins in a DVI link, though the primary load is signal, not bulk power. The 100 mating cycles are typical for a board-edge video port — enough for occasional reconnection in a desktop or industrial monitor, but not for a daily-disconnect field cable. Gold plating on the contacts preserves signal integrity across those cycles, resisting corrosion in non-sealed environments.

Mounting and Board-Layout Notes

The board lock feature provides extra solder-joint strain relief during mating, which is useful when the cable is routed near the port. The shield is steel, so it handles grounding and EMI containment without adding excessive weight. The tray packaging means it arrives loose for hand-placement or selective soldering, not reel-fed for automated pick-and-place.

MPN
743209010