Skip to main content
TE Connectivity AMP Connectors 1-1658622-1

TE AMP-Latch 1-1658622-1, 60-Pos IDC Receptacle

MPN 1-1658622-1
Active

TE Connectivity AMP-Latch series, IDC receptacle, 60 positions, 2 rows, 0.100" (2.54mm) pitch, 26-28 AWG ribbon cable, gold or gold-palladium contact finish, free-hanging (in-line) mount, black housing.

$5.9900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMP-Latch
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-1658622-1 specifications
ParameterValue
SeriesAMP-Latch
Wire typeRibbon Cable
TypeForked
MountingFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge26-28 AWG
Cable terminationIDC
ColorBlack
Pitch0.100\" (2.54mm)
PackageBulk
FeaturesFeed Through, Polarizing Key
Row spacing0.100\" (2.54mm)
Contact finishGold or Gold-Palladium
Rows2
Positions60
Contact finish thickness30.0µin (0.76µm)

Product details

It uses a forked contact that pierces the insulation on termination — no wire stripping or crimping needed. Typical applications include internal wiring in industrial controllers, telecom equipment, and computer peripherals where a high-density, parallel-wire interconnect is needed between a PCB and a cable harness.

The 60-position count on a dual-row 0.100" pitch means the connector body is about 3 inches long — a large footprint that needs clearance on the board edge or in the cable routing path. The polarizing key and feed-through feature prevent mis-mating and allow daisy-chaining through the connector body, which is useful for pass-through wiring in backplane or card-cage applications.

Termination is IDC: the ribbon cable is laid into the slot, the cover is pressed down, and the forked contacts cut through the insulation to make connection. No crimp tool, no solder. The free-hanging housing has integral strain relief features to protect the IDC termination point from cable pull.

MPN
1-1658622-1