Skip to main content
TE Connectivity AMP Connectors 120943-3

TE Connectivity 120943-3 UPM Receptacle, 5 Pos Blade Power

MPN 120943-3
Active

TE Connectivity UPM (Universal Power Modules) receptacle, female blade sockets, 5 positions, 1 row, press-fit termination, right-angle board-edge through-hole mount, gold 50.0µin contact finish, UL94 V-0, -40°C to 105°C, gray housing.

$7.7200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesUPM (Universal Power Modules)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

120943-3 specifications
ParameterValue
SeriesUPM (Universal Power Modules)
MountingBoard Edge, Through Hole, Right Angle
Connector typeReceptacle, Female Blade Sockets
Connector usageBackplane
Operating temperature-40°C ~ 105°C
ColorGray
Material flammability ratingUL94 V-0
PackageBulk
TerminationPress-Fit
Contact finishGold
Rows1
Positions5
Contact layout, typical5 Power
Contact finish thickness50.0µin (1.27µm)

Product details

It accepts female blade sockets in a single row, with all 5 positions loaded for pure power delivery — no signal contacts. The right-angle orientation and board-edge mounting put the power path perpendicular to the PCB, which is the typical layout for a plug-in card feeding a backplane bus bar.

Press-Fit Termination — No Solder, No Rework

The press-fit termination is the defining feature here. Instead of solder, the compliant pin compresses into the plated through-hole, creating a gas-tight joint. That means no solder voids, no wicking, and no rework — the connector is pressed into the board in one operation. For a backplane assembly with dozens of connectors, press-fit eliminates the thermal stress of wave soldering and makes field replacement of a damaged connector feasible: desolder a 5-position power header from a multi-layer backplane and you risk lifting the barrel. Press-fit pins pull out cleanly with the right tool. Board layout needs clearance behind the connector for the press tool anvil — typically 3-5 mm of keep-out on the opposite side.

The blade power contact style is a standard TE UPM format — the female socket blades accept the male tabs from the header. The single-row, 5-position layout is keyed by the housing geometry; there is no secondary keying option in this series. Confirm the header part number from the same UPM family to ensure the blade width and pitch align.

MPN
120943-3