Skip to main content
TE Connectivity AMP Connectors 2301845-2

TE AMPLIMITE HD-20 2301845-2, 15-Pin D-Sub Receptacle

MPN 2301845-2
Active

TE Connectivity AMPLIMITE HD-20 2301845-2, D-Sub receptacle, 15 positions, 2 rows, right-angle through-hole solder, gold-plated contacts, 2A per contact, 250VAC, board lock, UL94 V-0.

$4.9100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMPLIMITE HD-20
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2301845-2 key specifications
ParameterValue
SeriesAMPLIMITE HD-20
TypeSignal
MountingThrough Hole, Right Angle
Connector typeReceptacle, Female Sockets
Voltage rating250VAC
Current rating2A per Contact
Shell size, connector layout2 (DA, A)
Operating temperature-55°C ~ 105°C
ColorBlack
Contact materialBrass
Dielectric materialPolybutylene Terephthalate (PBT), Glass Filled
Shell material, finishSteel, Nickel Plated

All specifications

2301845-2 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
PackageTray
FeaturesBoard Lock
TerminationSolder
Contact finishGold
Flange featureMating Side, Female Screwlock (4-40)
Rows2
Backset spacing0.411\" (10.43mm)
Positions15
Contact finish thickness15.0µin (0.38µm)

Product details

The TE Connectivity AMPLIMITE HD-20 2301845-2 is a 15-position D-Sub receptacle with female sockets arranged in two rows. It uses the standard DA shell size (2, DA, A), which is the common footprint for 15-pin D-Sub connectors. Rated at 2A per contact and 250VAC, this is a signal-duty connector — not for power distribution.

Without the board lock, a right-angle D-sub is prone to lifting the solder pads if the cable gets yanked. The mating side carries a female 4-40 screwlock on the flange — this accepts the standard male screwlock from the mating plug or a panel-mount jackscrew. The screwlock is what keeps the mated pair tight under vibration; the friction of the D-shell alone is not enough for industrial or mobile equipment.

The contact finish thickness is specified on the mating side only — the solder tails are not gold-plated, which is typical for D-subs. The tin or solder coating on the tails is sufficient for the solder joint.

MPN
2301845-2