Skip to main content
TE Connectivity AMP Connectors 282809-4

282809-4 TE Connectivity 4-Pos 10.16mm Plug, Female Sockets

MPN 282809-4
Active

TE Connectivity AMP Connectors Buchanan series, 282809-4, 4-position plug, female sockets, 0.400" (10.16mm) pitch, 15 A, 600 V, screw rising cage clamp termination, free hanging, green housing, UL94 V-0.

$5.1400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

282809-4 key specifications
ParameterValue
TypePlug, Female Sockets
SeriesBuchanan
MountingFree Hanging (In-Line)
Voltage - UL600 V
Current - UL15 A
Plug wire entry180°
Wire strip length6-7.5mm
Wire gauge or range - AWG12-30 AWG
Wire gauge or range - mm20.05-3mm²
Operating temperature-40°C ~ 110°C
ColorGreen
Contact materialPhosphor Bronze

All specifications

282809-4 additional specifications
ParameterValue
Housing materialPolyamide (PA66), Nylon 6/6
Insulation height0.610\" (15.49mm)
Material flammability ratingUL94 V-0
Pitch0.400\" (10.16mm)
PackageBulk
FeaturesRetention Latches (Non-Wire Side)
Screw sizeM3
Torque - screw0.79 Nm (7.0 Lb-In)
Number of levels1
Termination styleScrew - Rising Cage Clamp
Positions4
Positions per level4
Contact mating finishTin

Product details

15 A / 600 V plug for panel wiring

The 282809-4 is a 4-position plug from the TE Buchanan series, rated 15 A at 600 V per UL — a common spec for industrial control panels, power distribution blocks, and HVAC equipment where the wire terminates in a field-serviceable screw clamp rather than a soldered joint.

Rising cage clamp termination

Termination is screw-driven rising cage clamp, accepting 12-30 AWG (0.05-3mm²) solid or stranded wire with a strip length of 6-7.5mm. The screw torque spec is 0.79 Nm (7.0 Lb-In) — overtightening can strip the PA66 threads; a torque screwdriver is recommended for consistent clamping force across all four positions. The plug is free-hanging (in-line) with 180° wire entry, so the cable enters straight into the cage clamp — no right-angle bend at the termination point. Retention latches on the non-wire side hold the plug mated to the header under vibration; you should hear them click when fully seated.

MPN
282809-4