Skip to main content
TE Connectivity AMP Connectors 284414-2

TE Connectivity 284414-2 Buchanan Terminal Block, 2 Pos

MPN 284414-2
Active

TE Connectivity Buchanan 284414-2, 2-position PCB terminal block, 3.50 mm pitch, 12 A, 300 V, top-entry screw cage clamp, through-hole, green PA66 housing, bulk.

$0.7800 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

284414-2 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current12 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.138\" (3.50mm)

All specifications

284414-2 additional specifications
ParameterValue
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.25 Nm (2.2 Lb-In)
Number of levels1
Mating orientationVertical with Board
Positions per level2

Product details

Terminal Block for PCB Power Distribution

The TE Connectivity Buchanan 284414-2 is a 2-position, single-level PCB-mount terminal block with a 3.50 mm pitch and top-entry screw termination. It is designed for terminating field wiring directly to a printed circuit board, commonly used in industrial control panels, power supplies, lighting ballasts, and building automation equipment where a reliable, serviceable wire connection is needed at the board edge. Each position is rated for 12 A at 300 V, which places this block squarely in the power interconnect category — not a signal-level header, but a point where power enters or leaves the PCB. The housing is molded in green polyamide (PA66/Nylon 6/6), the standard color for European-style PCB terminal blocks, making it visually identifiable in a mixed-component panel. The block is supplied in bulk packaging, which suits manual assembly or selective soldering lines.

Wire Termination and Field Service

Wire termination uses a Screw - Rising Cage Clamp mechanism. Turning the M3 screw (torque spec 0.25 Nm / 2.2 Lb-In) lifts a nickel-plated brass cage that accepts stripped solid or stranded wire from 12 AWG down to 30 AWG. The cage clamp applies even pressure across the conductor, avoiding the cold-flow issues common with screw-point terminations on stranded wire. The contact material is brass with tin plating, which is adequate for the 12 A rating and typical industrial environments. For applications requiring higher corrosion resistance or frequent re-termination cycles, the tin-plated contact surface should be evaluated against the expected service conditions. The mating orientation is vertical with the board — wires enter from the top, perpendicular to the PCB surface. This is the standard arrangement for board-edge terminal blocks where the wire bundle runs parallel to the board plane.

Ganging Multiple Blocks

The Interlocking (Side) feature allows multiple 284414-2 blocks to be mechanically snapped together side-by-side to form a multi-position terminal strip of any length. When ganged, each block remains independently replaceable. The interlock does not carry current — it is purely mechanical alignment. Electrical continuity between adjacent positions is handled by PCB traces or optional jumper bars, not by the interlock itself.

MPN
284414-2