Skip to main content
TE Connectivity AMP Connectors 284414-8

TE Connectivity 284414-8 Buchanan Terminal Block, 8 Pos

MPN 284414-8
Active

TE Connectivity Buchanan 284414-8, 8-position PCB terminal block, 3.50mm pitch, 12 A, 300 V, green, rising cage clamp, through-hole, M3 screw, side interlocking.

$4.7100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

284414-8 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current12 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.138\" (3.50mm)

All specifications

284414-8 additional specifications
ParameterValue
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.25 Nm (2.2 Lb-In)
Number of levels1
Mating orientationVertical with Board
Positions per level8

Product details

PCB Terminal Block for Power Distribution

It uses a rising cage clamp mechanism with an M3 screw, accepting wire from 12-30 AWG. The 3.50 mm pitch provides enough spacing for 300 V rated isolation between adjacent circuits, while the 12 A per-circuit rating suits low-to-moderate power distribution inside control cabinets, power supplies, and industrial equipment.

Side Interlocking for Multi-Position Assemblies

A key feature of this block is the side interlocking, which allows multiple 284414-8 units to be ganged side-by-side without additional brackets or jumpers. This is useful when you need more than 8 positions on a single PCB — simply interlock adjacent blocks to extend the terminal strip. The interlocking tabs align the housings and maintain the 3.50 mm pitch across the assembly.

Installation: Torque and Clamp

The M3 screw requires a torque of 0.25 Nm (2.2 Lb-In). Over-torquing can strip the brass-nickel screw or deform the rising cage clamp, which is brass-nickel plated. The clamp rises as the screw tightens, pressing the wire against the conductor bar. The contact material is brass with tin plating, adequate for the rated 12 A in dry indoor environments.

MPN
284414-8