Skip to main content
TE Connectivity AMP Connectors 3-640604-6

TE MTA-156 3-640604-6, 6 Pos IDC Receptacle, 0.156" Pitch

MPN 3-640604-6
Active

TE Connectivity MTA-156 IDC receptacle, 3-640604-6, 6 positions, 1 row, 0.156" (3.96mm) pitch, tin 80.0µin, 18 AWG, free-hanging, bulk.

$0.7400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesMTA-156
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

3-640604-6 specifications
ParameterValue
SeriesMTA-156
Wire typeDiscrete or Ribbon Cable
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge18 AWG
Cable terminationIDC
ColorOrange
Pitch0.156\" (3.96mm)
PackageBulk
FeaturesFeed Through
Contact finishTin
Rows1
Positions6
Contact finish thickness80.0µin (2.03µm)

Product details

MTA-156 IDC Receptacle, 6-Position, 18 AWG

The 0.156" (3.96mm) pitch is wider than typical 0.100" IDC connectors, giving more board-space margin for the mating header footprint and easier hand-routing of traces between pads. The orange housing is a visual key for the 18 AWG variant, helping avoid wire-gauge mix-ups on the harness floor.

Termination and Wire Handling

The IDC termination accepts both discrete wires and ribbon cable, so one housing covers point-to-point harnesses and ribbon-bus assemblies. The feed-through feature means the IDC slot passes through the housing — you can daisy-chain the signal through the connector without cutting the ribbon, which is useful for bus-style wiring where multiple taps share a common conductor. The free-hanging (in-line) mount lets the receptacle float in the harness; it mates with a board-mounted header, so the cable side has no rigid attachment point.

Contact Finish and Duty

That is a heavy tin deposit for an IDC contact — the thickness matters because the insulation displacement process cold-flows the wire into the slot, and thin tin can crack under the strain. 80.0µin gives the ductility to survive the IDC wipe without exposing the base metal. Tin is the right choice for a low-cycle, high-volume production harness where the connector mates a few times and stays mated; gold would be overkill for this duty.

MPN
3-640604-6