Skip to main content
TE Connectivity AMP Connectors 796690-2

TE Buchanan 796690-2 Terminal Block, 2 Pos, 5 mm, 17.5 A

MPN 796690-2
Active

TE Connectivity Buchanan 796690-2, 2-position PCB terminal block, 0.197" (5.00 mm) pitch, 17.5 A, 300 V, through-hole, rising cage clamp, 35° wire entry, green housing.

$1.1400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

796690-2 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current17.5 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Tin Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated
Pitch0.197\" (5.00mm)

All specifications

796690-2 additional specifications
ParameterValue
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.79 Nm (7.0 Lb-In)
Number of levels1
Mating orientation35° (145°) Angle with Board
Positions per level2

Product details

Buchanan 796690-2 — 2-Position PCB Terminal Block, 5.00 mm Pitch

The TE Connectivity Buchanan 796690-2 is a 2-position, single-level PCB terminal block from the Buchanan series, designed for wire-to-board power termination. It uses a screw-actuated rising cage clamp that accepts 12-30 AWG wire — the clamp lifts to capture the conductor against the tin-plated brass contact, not the screw itself, so the wire isn't damaged by the screw tip. Rated 17.5 A per position at 300 V, it's sized for power distribution, motor control, or power supply output — not signal-level work.

35° Wire Entry and Rising Cage Clamp

The rising cage clamp captures the wire with a brass, tin-plated clamp; the M3 screw is brass with nickel plating, torqued to 0.79 Nm (7.0 Lb-In). That torque spec is the factory recommendation — overtightening can strip the PA66 threads. The interlocking side feature lets you gang multiple blocks side-by-side on a DIN rail or panel without gaps between positions.

MPN
796690-2