Skip to main content
Amphenol F52Q-1A7H1-11017

F52Q-1A7H1-11017 — Amphenol ICC (FCI) Aorora F52Q 1.00mm

MPN F52Q-1A7H1-11017
Active

Amphenol ICC (FCI) Aorora F52Q, 17-position, 1.00 mm pitch, ZIF, slide lock, top-contact FFC/FPC connector, rated 0.5 A, 50 V, 30 mating cycles, gold flash, UL94 V-0.

$0.6400 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesAorora F52Q
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

F52Q-1A7H1-11017 key specifications
ParameterValue
SeriesAorora F52Q
MountingSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Top
Voltage rating50V
Current rating0.5A
Operating temperature-40°C~105°C
Housing colorNatural
Actuator colorBlack
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP), Glass Filled

All specifications

F52Q-1A7H1-11017 additional specifications
ParameterValue
Actuator materialPolyamide (PA9T), Nylon 9T, Glass Filled, Halogen Free
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.039\" (1.00mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Mating cycles30
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm, 0.33mm
Positions17
Contact finish thickness1.97µin (0.050µm)

Product details

The F52Q-1A7H1-11017: 1.00 mm pitch sets the land pattern on the PCB — at 17 positions the connector footprint is 17 mm wide plus the side keep-out for the slide lock actuator.

Signal Current and Contact Interface

Gold flash at 1.97 µinch (0.050 µm) on the mating face provides corrosion protection for the rated 30 mating cycles. In a one-time assembly or occasional disconnect scenario, that is adequate — but for repeated field service the thin plating will wear through sooner than a 15 µinch or 30 µinch gold contact. ZIF (zero insertion force) actuation — the slide lock opens the contact beams so the FPC slides in without scraping the pads, then the lock clamps the cable in place. This prevents pad damage on thin FPCs.

Cable and Actuator Compatibility

The cable end can be straight or tapered — the contact beams are on the top side of the connector, so the cable's conductive pads face upward when inserted. Slide lock actuator is black polyamide (PA9T) glass-filled, halogen-free. The housing is natural LCP glass-filled, UL94 V-0 rated — the LCP handles reflow temperatures without warping.

Environmental Range and Compliance

RoHS compliant per current directive. No halogen-free or REACH statements beyond the actuator material note — confirm full compliance against your regional requirements.

MPN
F52Q-1A7H1-11017