Skip to main content
Molex 5018761840

Molex 5018761840 iGrid Header 18 Pos 2mm R/A

MPN 5018761840
Active

Molex iGrid 501876 series, 5018761840, Board to Cable/Wire header, 18 circuits, 2.00mm pitch, right-angle through-hole, shrouded 4-wall, latch holder, tin-plated contacts, UL94 V-0.

$1.6300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesiGrid 501876
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5018761840 key specifications
ParameterValue
SeriesiGrid 501876
TypeMale Pin
MountingThrough Hole, Right Angle
Connector typeHeader
Fastening typeLatch Holder
Contact materialBrass
Insulation colorNatural
Insulation height0.327\" (8.30mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageTray

All specifications

5018761840 additional specifications
ParameterValue
ShroudingShrouded - 4 Wall
TerminationSolder
ApplicationsAutomotive, General Purpose, Industrial, Medical, Telecommunications
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions18
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.126\" (3.20mm)
Contact finish - matingTin

Product details

Right-angle iGrid header for wire-to-board

The 5018761840 is a Molex iGrid 501876 series header — 18 positions, 2.00mm pitch, right-angle through-hole termination. Shrouded on all four sides, with a latch holder that locks the receptacle in place — the latch is the primary retention against vibration in automotive and industrial cabinets.

The 2.00mm pitch and 0.079" row spacing put the 18 pins in a 2-row grid 16.00mm wide (8 pitches) by 2.00mm deep. The right-angle post length is 0.126" (3.20mm) — enough for a 1.6mm board with a solder fillet on the opposite side.

MPN
5018761840