Right-angle iGrid header for wire-to-board
The 5018761840 is a Molex iGrid 501876 series header — 18 positions, 2.00mm pitch, right-angle through-hole termination. Shrouded on all four sides, with a latch holder that locks the receptacle in place — the latch is the primary retention against vibration in automotive and industrial cabinets.
The 2.00mm pitch and 0.079" row spacing put the 18 pins in a 2-row grid 16.00mm wide (8 pitches) by 2.00mm deep. The right-angle post length is 0.126" (3.20mm) — enough for a 1.6mm board with a solder fillet on the opposite side.