Skip to main content
TE Connectivity AMP Connectors 163085-8

TE 163085-8 Multimate III+ Stamped Pin, 31.5µin Gold

MPN 163085-8
Active

TE Connectivity Multimate III+ series stamped pin, 163085-8, gold 31.5µin (0.80µm) contact finish, crimp termination, accepts 20-24 AWG wire, brass contact material.

$2.2200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

163085-8 specifications
ParameterValue
TypeStamped
SeriesMultimate III+
Wire gauge20-24 AWG
Contact materialBrass
PackageTape & Reel (TR) Cut Tape (CT)
Pin or socketPin
Contact finishGold
Contact terminationCrimp
Contact finish thickness31.5µin (0.80µm)

Product details

Stamped Pin for Multimate III+ Housings, 31.5µin Gold

It accepts 20-24 AWG wire and carries a gold plating at 31.5µin (0.80µm) on brass base material — the heavy gold layer is the key differentiator here, sized for repeated mating cycles and environments where tin would fret or corrode. This is a crimp-termination contact, not a solder cup, so the wire is cold-welded into the barrel with the proper die set.

The 20-24 AWG range covers the common signal and low-power wire sizes in a harness. At the 20 AWG end the pin carries the full rated current of the contact system; at 24 AWG the wire itself becomes the bottleneck. The brass body stamps cleanly without cracking the barrel during crimp — the material choice keeps the contact ductile enough for the crimp die to form a gas-tight joint.

Multimate III+ Housing Compatibility

This pin mates into any Multimate III+ receptacle or plug housing that accepts a stamped pin contact. The Multimate III+ system is a modular rectangular connector family used in industrial controls, power distribution, and rail applications — the stamped pin is the standard signal/power contact option. No special adapter or conversion is needed; it drops into the same cavity as the machined pin, though the stamped version is the cost-optimized choice for high-volume harness builds.

MPN
163085-8