Skip to main content
TE Connectivity AMP Connectors 4-1734592-7

TE 4-1734592-7 FPC Connector – 0.50mm Pitch, 47 Pos, ZIF

MPN 4-1734592-7
Active

TE Connectivity AMP Connectors FPC connector, 4-1734592-7, 0.50 mm pitch, 47 positions, bottom contact, ZIF with slide lock, surface-mount right-angle, gold flash contacts, 0.5 A, 250 V, -40°C to 85°C.

$1.3438 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

4-1734592-7 key specifications
ParameterValue
MountingSurface Mount, Right Angle
Cable end typeTapered
Flat flex typeFPC
Connector (Contact type)Contacts, Bottom
Voltage rating250V
Current rating0.5A
Operating temperature-40°C ~ 85°C
Housing colorNatural
Actuator colorIvory
Contact materialPhosphor Bronze
Housing materialLiquid Crystal Polymer (LCP)
Actuator materialThermoplastic

All specifications

4-1734592-7 additional specifications
ParameterValue
Height above board0.081\" (2.05mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
TerminationSolder
Contact finishGold
Locking featureSlide Lock
FFC, FCB thickness0.30mm
Positions47
Contact finish thicknessFlash

Product details

47-position FPC interconnect for dense board-edge routing

The right-angle surface-mount orientation places the cable entry parallel to the PCB, suiting board-edge or low-profile enclosures where z-height is tight at 2.05 mm above board. The gold flash finish on phosphor bronze contacts provides corrosion resistance for moderate mating cycles—adequate for assembly and occasional field service, but not for high-cycle reconnect duty where thicker gold plating would be specified. The ZIF mechanism with a slide lock secures the FPC without insertion force on the contacts, reducing wear during cable installation.

At 0.50 mm pitch, the 47 positions occupy a narrow footprint—roughly 23.5 mm along the connector body. The bottom-contact design means the FPC pads face the PCB, which affects routing of traces under the connector. The 0.30 mm FPC thickness is the accepted standard for this pitch class; the tapered cable end aids insertion into the ZIF mechanism. The thermoplastic actuator withstands repeated ZIF cycles without cracking.

Available through independent distribution channels.

MPN
4-1734592-7