Skip to main content
TE Connectivity AMP Connectors 5749111-4

TE Connectivity 5749111-4 AMPLIMITE .050 III

MPN 5749111-4
Active

TE Connectivity AMPLIMITE.050 III D-sub plug, 50 positions, 2 rows, 1A, 30V, IDC ribbon termination, shielded steel shell, gold-plated contacts, free-hanging.

$12.7900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesAMPLIMITE .050 III
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

5749111-4 key specifications
ParameterValue
SeriesAMPLIMITE .050 III
TypeSignal
MountingFree Hanging (In-Line)
Connector typePlug, Male Pins
Voltage rating30V
Current rating1A
Shell size, connector layout0.050 Pitch x 0.100 Row to Row
Operating temperature-55°C ~ 105°C
ColorBlack
Contact materialPhosphor Bronze
Dielectric materialThermoplastic
Shell material, finishSteel, Tin-Nickel Plated

All specifications

5749111-4 additional specifications
ParameterValue
Material flammability ratingUL94 V-0
PackageTube
FeaturesShielded
TerminationIDC, Ribbon Cable
Contact finishGold
Rows2
Positions50

Product details

It uses the 0.050 inch pitch x 0.100 inch row-to-row layout common to high-density D-subs, packing 50 signal contacts into a shell size that would normally carry 15 pins on a standard-density D-sub.

This is a signal connector, not a power interconnect; each contact carries logic-level or low-current analog signals.

Shielded Shell and IDC Termination

The steel, tin-nickel plated shell is the EMI barrier — it mates with the receptacle shell to create a continuous shield around the pin field. The IDC termination means the ribbon cable is mass-terminated in one press operation; there are no individual crimp contacts to replace. If a wire breaks in the harness, the entire connector is replaced, not repaired one contact at a time. The free-hanging mount lets the cable assembly float inside the chassis without a board-mounted header.

MPN
5749111-4