Skip to main content
TE Connectivity AMP Connectors 8134-HC-8P2

8134-HC-8P2 PCB Pin Socket, Press-Fit, Gold

MPN 8134-HC-8P2
Active

TE Connectivity AMP Connectors HOLTITE series, 8134-HC-8P2, press-fit PCB pin socket, gold-plated beryllium copper contact, accepts 0.025" ~ 0.035" (0.64mm ~ 0.89mm) pin diameter, no tail, bulk pack.

$0.8100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS Compliant
IncotermsDAP / DDP Available
SeriesHOLTITE
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

8134-HC-8P2 specifications
ParameterValue
SeriesHOLTITE
Tail typeNo Tail
Mounting hole diameter0.058\" (1.47mm)
Operating temperature-55°C ~ 125°C
Contact materialBeryllium Copper
PackageBulk
TerminationPress-Fit
Contact finishGold
Board thickness0.030\" (0.76mm)
Length - overall0.136\" (3.45mm)
Pin hole diameter0.042\" (1.07mm)
Accepts pin diameter0.025\" ~ 0.035\" (0.64mm ~ 0.89mm)
Accepts square pin size0.025\" (0.64mm)
Contact finish thickness24.8µin (0.63µm)

Product details

What this press-fit pin socket is built for

The 8134-HC-8P2 is a single-circuit press-fit pin socket from TE's HOLTITE series — it's a solderless receptacle that grabs a mating pin or component lead by spring force, not a crimp or solder joint. It accepts round pins from 0.025" to 0.035" diameter, and square pins up to 0.025" per side — so it fits standard 0.025" square header posts, component leads, or test points.

Press-fit installation and board prep

The socket has no solder tail — it presses into a 0.058" (1.47 mm) mounting hole, and the board thickness must be at least 0.030" (0.76 mm) for the retention barbs to bite. The pin hole diameter inside the socket is 0.042" (1.07 mm) — that's the clearance bore the mating pin slides into before the contact beams close. Overall length is 0.136" (3.45 mm) from the top of the socket to the bottom of the press-fit barrel — short enough to keep the z-height low on dense boards.

MPN
8134-HC-8P2