Skip to main content
TE Connectivity AMP Connectors 1-104071-0

1-104071-0 TE AMPMODU System 50 Header, 8 Pos, 1.27mm

MPN 1-104071-0
Active

TE Connectivity AMP Connectors AMPMODU System 50 pin header, 1-104071-0, vertical through-hole, 8 positions, 1.27mm pitch, shrouded 2-wall, gold mating finish, latch holder fastening.

$2.4900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSNot applicable
IncotermsDAP / DDP Available
SeriesAMPMODU System 50
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-104071-0 key specifications
ParameterValue
SeriesAMPMODU System 50
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typeLatch Holder
Voltage rating30VAC
Operating temperature-65°C ~ 105°C
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.390\" (9.91mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0

All specifications

1-104071-0 additional specifications
ParameterValue
StyleBoard to Board or Cable
PackageTube
ShroudingShrouded - 2 Wall
TerminationSolder
ApplicationsAutomotive, General Purpose, Medical, Telecommunications
Contact shapeCircular
Rows1
Pitch0.050\" (1.27mm)
Positions8
Contact finish - postTin-Lead
Contact length - post0.100\" (2.54mm)
Contact finish - matingGold
Contact length - mating0.125\" (3.18mm)
Contact finish thickness - post150.0µin (3.81µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Board layout fit: 1.27mm pitch, 8 circuits, gold mating surface

The 1-104071-0 is a vertical through-hole header from TE's AMPMODU System 50 series, packing 8 positions on a tight 0.050" (1.27mm) pitch.

Mating half and retention: latch holder, 2-wall shroud

The header is shrouded with 2 walls and uses a latch holder fastening type — the mating receptacle clicks into place without a separate locking clip. This is a vibration-resistant mate for cable-to-board connections in enclosures where the connector pair won't be cycled daily. Contact length on the mating side is 0.125" (3.18mm), post length is 0.100" (2.54mm) — standard through-hole solder depth for a 1.6mm board. The circular male pins are copper alloy.

MPN
1-104071-0