Skip to main content
TE Connectivity AMP Connectors 1-2834019-3

TE 1-2834019-3 Terminal Block, 3 Pos, 3.50mm, 6 A

MPN 1-2834019-3
Active

TE Connectivity, 1-2834019-3, 3-position terminal block, 3.50mm pitch, 6 A, 300 V, through-hole, side-entry, screwless, green, bulk.

$0.5900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1-2834019-3 specifications
ParameterValue
MountingThrough Hole
Voltage300 V
Current6 A
Wire gauge16-20 AWG
Wire terminationScrewless
Operating temperature-40°C ~ 105°C
ColorGreen
Housing materialPolyamide (PA66), Nylon 6/6
Contact material - platingCopper Alloy - Tin Plated
Pitch0.138\" (3.50mm)
PackageBulk
Number of levels1
Mating orientationHorizontal with Board
Positions per level3

Product details

3-Position Screwless Terminal Block for PCB

The 1-2834019-3: It uses a screwless spring-clamp termination — push the wire in, no tool required — accepting 16-20 AWG conductors. Contacts are copper alloy with tin plating — adequate for the rated current and environment, though gold plating would be specified if repeated field reconnections were the primary duty.

Screwless Termination and Board Fit

The screwless clamp accepts solid or ferruled stranded wire from 16 AWG down to 20 AWG. Insertion is a single push — the spring holds the conductor against the current bar. No screw torque to verify, which speeds panel assembly and eliminates the risk of under-torqued connections in high-vibration environments. The through-hole mounting pins are on 3.50 mm centres; the PCB layout needs a plated hole diameter matching the pin dimensions from the product drawing. Mating orientation is horizontal with the board — the wire entry is on the side, so the block sits low and the wires run parallel to the PCB. This suits enclosures where vertical clearance above the board is tight. The single-level design keeps all three terminations in one row.

MPN
1-2834019-3