Skip to main content
TE Connectivity AMP Connectors 102393-1

TE 102393-1 AMPMODU MT Receptacle, 6 Pos, 0.100" Pitch, IDC

MPN 102393-1
Active

TE Connectivity AMPMODU MT, Receptacle, 6 Positions, 2 Row, 0.100" (2.54mm) Pitch, IDC Termination, Gold 30.0µin (0.76µm), Free Hanging, Black.

$4.4700 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSRoHS non-compliant
IncotermsDAP / DDP Available
SeriesAMPMODU MT
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

102393-1 specifications
ParameterValue
SeriesAMPMODU MT
Wire typeDiscrete or Ribbon Cable
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge26-30 AWG
Cable terminationIDC
ColorBlack
Pitch0.100\" (2.54mm)
PackageTray
FeaturesClosed End
Row spacing0.100\" (2.54mm)
Contact finishGold
Rows2
Positions6
Contact finish thickness30.0µin (0.76µm)

Product details

It terminates discrete or ribbon cable with a mass-termination IDC slot — no wire stripping, just a press tool and a consistent gas-tight joint on every conductor. The 0.100" (2.54mm) pitch matches the standard AMPMODU header grid, so the board footprint is a known quantity for any 6-position, dual-row male pin header. Gold plating at 30.0µin (0.76µm) on the female socket contacts gives this part the mating-cycle margin for field-service or repeated test connections, well above the 15 µ" floor for corrosive or high-reliability environments.

The IDC slot accepts 26-30 AWG wire — 30 AWG is explicitly in range, so fine-pitch ribbon cable or discrete 30 AWG signal wire lands without a crimp terminal. The Closed End feature on the housing gives a positive stop for the cable jacket, so the conductors register at the same depth every time the press tool cycles. That matters when you are running a harness build: consistent insertion depth means every conductor gets the same contact wipe and the same retention.

MPN
102393-1