Skip to main content
TE Connectivity AMP Connectors 1546073-3

TE Buchanan 1546073-3 Terminal Block, 3 Pos, 5.08mm, 17.5 A

MPN 1546073-3
Active

TE Connectivity Buchanan series, 1546073-3, 3-position PCB terminal block, 5.08 mm pitch, 17.5 A, 300 V, through-hole, screw rising cage clamp, black housing.

$1.4300 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesBuchanan
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1546073-3 key specifications
ParameterValue
SeriesBuchanan
MountingThrough Hole
Voltage300 V
Current17.5 A
Wire gauge12-30 AWG
Wire terminationScrew - Rising Cage Clamp
Operating temperature-40°C ~ 105°C
ColorBlack
Housing materialPolyamide (PA66), Nylon 6/6
Clamp material - platingBrass - Nickel Plated
Screw material - platingBrass - Nickel Plated
Contact material - platingBrass - Tin Plated

All specifications

1546073-3 additional specifications
ParameterValue
Pitch0.200\" (5.08mm)
PackageBulk
FeaturesInterlocking (Side)
Screw threadM3
Torque - screw0.79 Nm (7.0 Lb-In)
Number of levels1
Mating orientationVertical with Board
Positions per level3

Product details

The TE Connectivity Buchanan 1546073-3 is a 3-position PCB-mount terminal block with a 5.08 mm pitch, designed for wire-to-board termination in industrial control panels, power supplies, and building automation equipment. It uses a screw-driven rising cage clamp — the screw pushes a clamp plate down onto the conductor, not the wire itself, so the wire isn't nicked or deformed during termination. The 17.5 A per position rating at 300 V covers most signal-level and low-power distribution circuits inside an enclosure.

The 12-30 AWG wire range accepts fine signal wires up to 12 AWG for power feeds; the rising cage clamp handles solid, stranded, and ferruled conductors.

Mating Orientation and Termination

This is a top-entry (vertical with board) orientation — wires enter perpendicular to the PCB surface, so the block sits flat on the board and the screw terminals face upward. The termination is a screw-driven rising cage clamp: strip the wire to the recommended length, insert it into the clamp opening, and tighten the M3 screw to 0.79 Nm. The clamp rises to press the conductor against the current bar — no crimp tool, no ferrule required for solid or stranded wire. Through-hole mounting pins anchor the block to the PCB; the pins are tin-plated brass for solderability.

MPN
1546073-3