Skip to main content
TE Connectivity AMP Connectors 2007791-1

TE Impact 2007791-1 Header, 90 Pos, 0.075" Pitch

MPN 2007791-1
Active

TE Connectivity Impact series backplane header, 90 positions, 0.075" (1.90mm) pitch, 9 rows, 10 columns, press-fit termination, gold 30.0µin contact finish, UL94 V-0, black housing.

$10.7000 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesImpact
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2007791-1 specifications
ParameterValue
SeriesImpact
MountingThrough Hole
Connector typeHeader, Male Pins
Voltage rating29.9VAC/DC
Current rating0.75A per Contact
Connector usageBackplane
Operating temperature-55°C ~ 85°C
ColorBlack
Material flammability ratingUL94 V-0
Pitch0.075\" (1.90mm)
PackageBulk
TerminationPress-Fit
Contact finishGold
Rows9
Number of columns10
Positions90
Contact layout, typical60 Signal, 30 Ground
Contact finish thickness30.0µin (0.76µm)

Product details

Backplane Header for High-Density Signal Routing

The TE Connectivity 2007791-1 is a 90-position Impact series backplane header, male pins, arranged in 9 rows by 10 columns. It carries a 60-signal, 30-ground contact layout — the ground density is deliberate, controlling crosstalk in high-speed differential pair routing. The 0.075" (1.90mm) pitch is tight for a backplane header, which means the board footprint forces a higher layer count to route all signals out. This is a signal-level interconnect, rated 0.75A per contact, not a power header — don't mistake the 90 positions for current capacity.

Press-Fit Termination, No Solder

Termination is press-fit through-hole. That means the compliant pin cold-deforms into the plated through-hole — no solder joint, no reflow profile to manage. This is standard for backplane assembly where rework matters: you can pull a damaged header and seat a replacement without desoldering 90 joints. The trade-off is that the PCB hole size and plating thickness must match the press-fit pin spec exactly, or the retention force drops off.

Gold Plating and Mating Cycles

That thickness supports repeated daughtercard insertions — typical backplane service life of 200+ cycles without exposing base metal.

Lifecycle status is Active per the manufacturer. No last-time-buy notice, no phase-out. ROHS3 compliant. No stock-holding claim from this desk.

MPN
2007791-1