Skip to main content
TE Connectivity AMP Connectors 2013798-1

TE 2013798-1 USB-A Plug, USB 2.0, 4 Pos, Shielded

MPN 2013798-1
Active

TE Connectivity USB-A (USB TYPE-A) plug, 4 contacts, 1 port, USB 2.0, shielded, gold contact finish, solder termination, free hanging, IP20, 1 A, 30 VAC.

$8.6100 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

2013798-1 specifications
ParameterValue
MountingFree Hanging (In-Line)
Connector typeUSB-A (USB TYPE-A)
Voltage - rated30VAC
Current rating1A
Positions4
IP ratingIP20
Operating temperature-55°C ~ 85°C
Shell (Shielding material)Steel
Material flammability ratingUL94 V-0
GenderPlug
PackageTray
FeaturesLatch Lock
ShieldingShielded
TerminationSolder
Mating cycles1500
Contact finishGold
SpecificationsUSB 2.0
Number of ports1

Product details

USB-A Plug for In-Line Cable Assemblies

It terminates via solder to a cable and mounts free-hanging (in-line), making it the plug half of a standard USB 2.0 cable assembly. The shielded steel shell provides EMI containment for the data pair, and the latch lock secures the mated connection against accidental disconnect. Gold contact finish on the pins resists corrosion over the rated 1500 mating cycles — a durability figure that suits equipment with frequent cable swaps, such as test fixtures or field-service tools.

1 A at 30 VAC — USB 2.0 Power and Signal

Rated 1 A per contact at 30 VAC, the 2013798-1 carries the standard USB 2.0 power bus (5 V, up to 500 mA for low-power devices, 900 mA for high-power under USB 2.0 spec) with margin. The 1 A rating is per the connector's own thermal limit, not the USB bus current — it will handle the full bus load without exceeding the UL94 V-0 housing's temperature rise ceiling.

The solder termination requires a soldering iron or selective solder process; no crimp tool needed.

MPN
2013798-1